Polycom 6400-S Network Hardware User Manual


 
User Guide V
2
IU 6400-S Converged Network Appliance
1 - 4
Features
Resolves firewall traversal problems at the Network Operations Center for
VoIP by providing a VoIP application layer gateway (ALG) or voice and
video aware firewall that supports SIP, MGCP and H.323
Resolves firewall traversal problems at customer offices for VoIP by
providing NAT-Traversal capability for SIP.
Supports up to 10,000 concurrent VoIP calls or up to 85 Mbps of H.323
video traffic
Protects the enterprise LAN using a stateful packet inspection (SPI)
firewall for both voice and data traffic
Performs static IP routing
Provides integrated test tools to facilitate problem isolation
Performs TFTP relay for IP phone images
Uses a simple web based GUI for configuration and management
Supports logging to external syslog servers and interfaces to network
management systems using SNMP
Physical Connections and Specifications
Port Description
Subscriber (ETH0) Ethernet
Port 1
This port is a 10/100/1000 auto sensing
port. It is connected through an Ethernet
switch to IP phones, IADs or PCs installed
on the public network.
Provider (ETH1) Ethernet
Port 2
This port is a 10/100/1000 auto sensing
port. It is connected to the private network.
Out of Band Management
Port 3
This port can be configured to allow out of
band management sessions. It is typically
connected to a private management
network.
Console Port (COM 1) This port is used to establish a local
console session with the EdgeProtect
using a VT100 terminal or emulation
program. The baud rate is 9600. It is used
for debug or local diagnostic purposes
only.