Filter
Top Products
Configuring the Firewall
6 - 3
Basic settings rules
Follow these rules when configuring basic settings:
• For Allow TCP Port and Allow UDP Port, valid values are 1 through
65535.
• Separate multiple entries by spaces,
• Indicate a range of values with a colon (:). For example, 25:50 means
perform the action on ports 25 through 50
Configuring advanced firewall settings
A comprehensive security policy can be created using advanced settings.
To configure advanced settings:
1. In the navigation pane, select Firewall and scroll to Advanced LAN and
WAN Firewall Settings.
2. Enable to disable firewall logging. (See Enabling or disabling the firewall
on page 6-4.)
3. Configure Deny Hosts (IP) according to the rules in Advanced setting
rules on page 6-4. Deny Hosts (IP) denies all traffic with the source IP
address matching the specified hosts