Filter
Top Products
Configuring VoIP
5 - 5
Automatic MGCP Audit The Automatic MGCP Audit flag specifies
whether MGCP clients should be
automatically audited by sending a
message to each client and wait for a
response.
Audit Cycle Interval The Audit Cycle Interval specifies how
often these messages should be sent out
to the clients. For each cycle, all endpoints
are audited so the rate of messages being
sent is dependent on the number of clients
currently registered.
State Time The Stale Time value is used to decide
when a client is supposed to be deemed
stale, or unavailable.
Prevent state re-registration The Prevent stale re-registration flag can
be used to disable the automatic MGCP
re-registration feature for stale clients.
Automatic Client Deletion Automatic Client Deletion will delete
clients that have been unavailable for a
given period of time.
Deletion Time Deletion Time specifies the time that a
stale client will show a warning icon in the
client list.
H 323 Terminal Type The H.323 TerminalType is used to
specify the type of terminal that the
6400-S should use. This value should be
set to endpoint.
Maximum bandwidth (kbps) This value is not used and should be set
to 0.
Current payload bandwidth The total bandwidth in use for H.323 video
calls as requested by the H.323 video
endpoints.
Estimated total bandwidth The total bandwidth in use for video calls;
generally the current payload bandwidth
plus 20% for packet overhead.
H 323 Max Aliases This value is not used and should be set
to 0.
Field Description