Filter
Top Products
Polycom RMX 1500/2000/4000 Getting Started Guide for Audio Only
3-35
2 Define the following fields:
Table 3-6 New Participant – General Properties
Field Description
Name Enter the name of the participant or the endpoint as it
will be displayed in the RMX Web Client. The Name
field can be composed using Unicode encoding:
•
English text uses ASCII encoding and can contain
the most characters (length varies according to the
field).
• European and Latin text length is approximately
half the length of the maximum.
• Asian text length is approximately one third of the
length of the maximum.•
Maximum field length in ASCII is 80 characters.
The maximum length of text fields varies according to
the mixture of character sets used (Unicode and
ASCII).
Note: This field is displayed in all tabs.
Endpoint
Website (IP only)
Click the Endpoint Website hyperlink to connect to the
internal website of the participant’s endpoint. It
enables you to perform administrative, configuration
and troubleshooting activities on the endpoint.
The connection is available only if the IP address of
the endpoint’s internal site is defined in the Website IP
Address field.
Dialing Direction Select the dialing direction:
• Dial-in – The participant dials in to the
conference.
• Dial-out – The MCU dials out to the participant.
Notes:
• This field applies to IP participants only.
• Dial-out is forced when defining an ISDN/PSTN
participant.