Filter
Top Products
Polycom RMX 1500/2000/4000 Getting Started Guide
2-19
First Entry Power-up and Configuration
There are four procedures necessary for setup of the new RMX. It is
important that they are performed in the following sequence:
1 First-time Power-up
2 Product Registration.
3 Connection to MCU.
4 Modifying the Default IP and ISDN/PSTN Service Settings (Fast
Configuration Wizard).
Procedure 1: First-time Power-up
To power-up for the first time using the USB key:
1 Insert the USB key containing the modified IP addresses in USB port
on the RMX 1500 front panel and RMX 2000/4000 back panel.
Preparations
Hardware
Installation
and
Setup
First Entry
Power-up and
Configuration