Polycom DOC2585A Server User Manual


 
2-1
2
First Time Installation and
Configuration
First Time Installation and Configuration of the Polycom RMX 1500/2000/4000
consists of the following procedures:
1 Preparations:
Gather Network Equipment and Address Information - get the
information needed for integrating the RMX into the local
network.
Unpack the RMX.
Modify the Management Network parameters on the USB Key.
2 Hardware Installation and Setup
Mount the RMX in a rack.
Connect the necessary cables.
3 First Entry Power-up and Configuration
Power up the RMX.
Register the RMX.
Connect to the RMX
Configure the Default IP Network Service.
Configure the ISDN/PSTN Network Service.
Preparations
Hardware
Installation
and
Setup
First Entry
Power-up and
Configuration