Filter
Top Products
Polycom RMX 1500/2000/4000 Getting Started Guide for Audio Only
1-3
The Polycom RMX 1500/2000/4000 unit can be controlled via the LAN,
by the RMX Web Client application, using Internet Explorer installed on
the user’s workstation or the RMX Manager application. The RMX
Manager can control several RMX units (RMX 1500, RMX 2000 and
RMX 4000). For more information about the RMX Manager, see "RMX
Manager Application” on page 17-1.
In the RMX 1500 and RMX 2000, RMX management and IP conferencing
are performed via a single LAN port. The networks can be separated in
the Enhanced Security Environment such as DoD environment.
In the RMX 4000, RMX management and IP conferencing are performed
via two different LAN ports. The networks can be separated in the
Enhanced Security Environment.
The RMX 1500 supports one ISDN card with 4 E1/T1 PRI lines.
On the RMX 2000/4000 a maximum of two RTM ISDN cards are
supported, each providing connection for up to either 7 E1 or 9 T1 PRI
lines (E1 and T1 connections cannot be used simultaneously).
On RMX 1500/2000/4000, E1 and T1 connections cannot be used
simultaneously.
System Capacities
The following table summarizes the different system capacities.
R
Table 1-1 System Functions and Capacities
System Functions
RMX 1500 RMX 2000 RMX 4000
MPMx MPM MPM + MPM x MPM+ MPMx
Maximum no. of VOIP (Audio
only) participants in a
conference
360 160 400 720 800 800
Maximum no. of PSTN
participants in a conference
120 160 400 400 400 400
Maximum number of
conferences
400 200 400 400 800 800
Maximum number of Meeting
Rooms
1000 1000 1000 1000 2000 2000