Filter
Top Products
Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP Optimization
96 Copyright © 2004 Polycom, Inc.
4.6.1.12.1 IP_500 font <IP_500/>
4.6.1.12.2 IP_600 font <IP_600/>
4.6.1.13 Keys <keys/>
These settings control the scrolling behavior of keys and can be used to change key
functions.
SoundPoint
®
IP 300, 500 and 600 key functions can be changed from the factory
defaults, although this is typically not necessary. For each key whose function you
wish to change, add an XML attribute in the format described in the following table to
Attribute Permitted Values Default Interpretation
font.IP_500.x.name fontName_height_Uxx00
_UyyFF.fon OR
fontName_height_Uxx00
_UxxFF.fnt
Null Defines the font file that will be
loaded from boot server during boot
up.
Note: When several
font.IP_500.x.names are defined, the
index x must follow consecutive
increasing order.
Attribute Permitted Values Default Interpretation
font.IP_600.x.name fontName_height_Uxx
00_UyyFF.fon OR
fontName_height_Uxx
00_UxxFF.fnt
Null Defines the font file that will be
loaded from boot server during boot
up.
Note: When several
font.IP_600.x.names are defined, the
index x must follow consecutive
increasing order.
Attribute
Permitted
Values
Default Interpretation
key.scrolling.timeout positive
integer
1 The time-out after which a key that is enabled
for scrolling will go into scrolling mode until the
key is released. Keys enabled for scrolling are
menu navigation keys (left, right, up, down
arrows), volume keys, and some context-spe-
cific soft keys. The value is an integer multiple
of 500 milliseconds (1=500ms).