Filter
Top Products
Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP Optimization
Copyright © 2004 Polycom, Inc. 127
4.6.3.4.1 Digit Map <digitmap/>
4.6.3.4.2 Routing <routing/>
This configuration section allows specific routing paths for outgoing SIP calls to be
configured independent of other ‘default’ configuration.
4.6.3.4.2.1 Server <server/>
Attribute
Permitted
Values
Default Interpretation
dialplan.x.digitmap string compatible with
the digit map feature of
MGCP described in
2.1.5 of RFC 3435;
string is limited to 512
bytes and 20 segments; a
comma is also allowed;
when reached in the
digit map, a comma will
turn dial tone back on.
Null When present, this attribute
overrides the global dial
plan defined in the sip.cfg
configuration file.
For more information, see
4.6.2.1.3.5 Conference
Setup <conference/> on
page 118.
dialplan.x.digitmap.timeOut positive integer Null When present, and if dial-
plan.x.digitmap is not Null,
this attribute overrides the
global dial plan defined in
the sip.cfg configuration
file.
For more information, see
4.6.2.1.3.5 Conference
Setup <conference/> on
page 118.
Attribute Permitted Values Default Interpretation
dialplan.x.rout-
ing.server.y.address
dotted-decimal IP
address or host name
Null IP address or host name
and port of a SIP server
that will be used for
routing calls. Multiple
servers can be listed
starting with y=1, 2, ...
for fault tolerance.
dialplan.x.rout-
ing.server.y.port
1 to 65535 5060