Filter
Top Products
7
Powerware 9315 (200 kVA---300 kVA) Operation
164201036 Rev. D 041500
Output Transformer
An optional 480/208 VAC output auto transformer provides a 208 VAC output for
applications that require 208 VAC. The transformer is contained in a separate
cabinet.
Modem
An optional modem is available for use with the UPS Remote Notification feature
described in Chapter 8, “Remote Notification”. Refer to the manual supplied with
the modem for modem operating instructions.
Customer Convenience Outlet
An uninterruptible 120VAC, 0.2 amp, fuse-protected convenience outlet is provided
to supply power to the o ptional modem. It is located adjacent to the
Communications Panel.
Safety Considerations
The UPS enclosures are designed for industrial or computer room applications,
and contain safety shields behind the doors. However, the UPS is a sophisticated
power system and should be handled with appropriate care, following these
guidelines:
· K eep surroundings clean and free from excess moisture.
· Do not operate the UPS close to gas or electric heat sources.
· The system is not intended for outdoor use.
· The UPS operating environment should be maintained within the
parameters stated in this manual.
· Keep the UPS doors closed to ensure proper cooling ai rflow and to protect
personnel from dangerous voltages inside the unit.
· The UPS contains its own power source. Lethal voltages are present even
when the UPS is disconnected from utility power.
WARNING:
Only AUTHORIZED SERVICE PE RSONNEL should perform service or
maintenance on the UPS or battery.
If service or routine UPS maintenance is required:
· Ensure all power is disconnected before performing installation or service.
· Ensure the area around the UPS system is clean and uncluttered.
· Battery cabinet maintenance or battery replacement should be performed
only by authorized service personnel.
· Observe all DANGER, CAUTION, and WARNING notices affixed to the
inside and outside of the equipment.
· Always conform to the more detailed safety precautions described in
“Important Safety Instructions” section of Chapter 9.