Filter
Top Products
66
Powerware 9315 (200 kVA---300 kVA) Operation
164201036 Rev. D 041500
Final Modem Configuration
The final step in configuring the PC modem for use with the UPS is t o turn off the echo
feature of the modem. Perform the following procedure.
NOTE: The brackets ([ ]) in the following steps indicate characters that require
keying in prior to pressing [ENTER].
1. Connect the modem to the PC as described in the modem manufacturer’s manual.
2. Keyin[A],[T],thenpress[ENTER].
3. Confirm that the modem responds with “OK” or “0” (zero).
4. Keyin[A],[T],[E],[0](zero),thenpress[ENTER].
5. Confirm that the modem responds with “OK” or “0” (zero).
6. Keyin[A],[T],thenpress[ENTER].
7. Confirm that the modem responds with “OK” or “0” (zero) and that the “AT” is not
echoed back to the terminal.
8. Keyin[A],[T],[&],[W],[0](zero),thenpress[ENTER].
9. Confirm that the modem responds with “OK” or “0” (zero).