Filter
Top Products
8 Hardware and Software Set-Up and Testing
B. CONNECTING THE CABLES
• Remove the tape securing the arm to the base plate of
the Autoloader.
• Locate the power cord supplied with your unit.
• Plug the adapter into a surge protected outlet, and plug the
power plug into the power port on the rear panel of the
Publisher.
• Connect the unit to your PC with your beige USB Cable.
After a few moments, Windows will tell you it has found
new hardware and is looking for software to install it.
• Select "Install the software automatically" and click Next.
Power USB
510975.qxd 9/28/2006 9:39 AM Page 8
INDEX
TOC