Filter
Top Products
D. SYSTEM REQUIREMENTS
Please refer to the PC system requirements for Duplicator that
will be used with the unit.
NOTE: The ADL-MAX is not Macintosh compatible.
E. OVERVIEW OF OPERATION
The following is a description of the complete process of
copying and printing a CD job on your Autoloader:
1. Up to 300 blank discs may be loaded at one time. Each
Input/Output Bin will hold 100 discs. The far left
Input/Output Bin is left empty to be the first to collect
finished output.
2. The Autoloader has an integrated robotic arm that "picks"
one disc one at a time from an Input Bin.
3. CD Recorder Trays open automatically and the Robotic
Arm places a disc into each of the recorders.
4. All CD Recorder Trays then automatically shut.
Through software control, you can perform a verification test
on each CD-R disc before recording. If a disc does not pass
(meaning that all or part of that disc is not recordable), the
Robotic Arm picks it out of the CD Tray and sends it to the
Reject Area, in the left bin of the Disc Publisher.
5. The CD-Rs are now recorded. If you were to fill up each
CD with data, audio, video or music (650 MB), recording
time is about 3 ½ to 4 minutes each. DVDs recording time
is from 7-15 minutes depending on the speed of your
media. Most jobs don't fill the entire disc, so recording time
is usually less than this.
6. After recording, the Trays open automatically. The Robotic
Arm will transport the first disc to the printer. All others
will be transported to the Disc Publisher Output Bin
temporarily.
7. The Robotic Arm will now load the drives with blank
CD-Rs from an Input Bin to start recording the next round.
Getting Started 5
510975.qxd 9/28/2006 9:39 AM Page 5
INDEX
TOC