Filter
Top Products
Maintenance and Troubleshooting
19
Section 4: Interpreting the Autoloader's
LED Status Lights
The LED Status Lights are located on the front Control Panel.
They can tell you a lot about what is happening at any given
moment with the unit, including a number of error conditions.
To accurately interpret what is meant when the lights are on,
off, or flashing, please refer to the following chart:
A. POWER LED
Status Condition
Off No Power. Plug in the Power Adapter. Also, check
the USB cable on the back of the unit.
On Solid Power is ON. This is the unit’s normal
"waiting" mode.
Flashing Power is ON, but an error condition exists:
a. Didn't pick up a disc
b. Dropped a disc
c. Discs out
d. Robotic arm stalled; it probably hit something
while moving. Press any button on Control Panel
to re-try.
B. PAUSE LED
Status Condition
Off Normal "waiting" mode
On Solid Autoloader is paused.
Flashing Autoloader is busy; i.e. motors are running,
printer is printing, etc.
Power LED
Pause LED
510975.qxd 9/28/2006 9:39 AM Page 19
INDEX
TOC