Filter
Top Products
Hardware and Software Set-Up and Testing 11
• Attach the stand to the unit using the adjustment bolts and
the washers. Do not tighten the bolts at this point!
D. INSTALLING THE DISC PUBLISHER
• Open the cover of the Disc Publisher.
• Lower the Disc Publisher onto the stand. The pegs will
correspond with the holes on the bottom of the unit. There
are several sets of holes on the bottom of the Disc
Publisher. The pegs fit in the front-most and outer most
set of holes.
510975.qxd 9/28/2006 9:39 AM Page 11
INDEX
TOC