Filter
Top Products
18 Running Your First Job
C. CHANGING CARTRIDGES
During normal operation you will be prompted to change the
cartridge at the same time the low ink warning is displayed.
Follow the on-screen instructions to change the cartridge.
If it becomes necessary to change cartridges at a time other
than when the low ink warning is displayed follow the
instructions below:
1. Open Primo DVD or RoboPrint
2. Go the Robotics Menu - Options (Robot Options button in
RoboPrint)
3. Click the Change Ink Cartridge button
4. Insert the cartridges according to the Disc Publisher or
AutoPrinter manual.
5. Press the cartridge (left) button on the Disc Publisher when
finished changing cartridges.
Note: Since the Disc Publisher lid sensor is disabled when the Autoloader
is connected it is not possible to use the normal cartridge change
procedure with the cartridge button on the top of Disc Publisher.
510975.qxd 9/28/2006 9:39 AM Page 18
INDEX
TOC