Filter
Top Products
Paper Size
The paper size option will be set to CD for printing onto
printable surface CDs and DVDs. The remaining options
apply if you have purchased the business card adapter kit.
Non-printable Outer Margin
Adjust this value to print all the way to the outer edge of a CD.
This is useful if you are printing full coverage images. The
lower you set this value the farther to the outer edge of the CD
you will print. Please note that with most media the printable
surface does not extend all the way to the edge of the disc.
Because of this you will not normally set this value to zero. You
may also want to adjust the inner diameter setting found under
the Calibration Options which is explained later in this section.
Resolution
Select the appropriate print quality option for your image.
Keep in mind that Normal provides the lowest quality but
with the least ink usage. Best provides the highest quality but
with higher ink usage. Print speeds also vary slightly between
settings. However, speed is affected most by the Disc Surface
Quality setting. You may wish to experiment with these
options to see which one is best for your particular CD media
and print quality requirements.
Print Quality
This setting affects the quality, speed and ink usage of the
print. Color matching is also tied to this setting. Start with the
default setting for fastest printing and the least amount of ink
consumption. If the quality needs improvement move to the
next highest setting.
Disc Surface Quality
This setting affects the quality, speed and ink usage of the
print. Color matching is also tied to this setting. Start with the
default setting for fastest printing and the least amount of ink
consumption. If the quality needs improvement move to the
next highest setting.
Creating Discs on a PC 25