Filter
Top Products
C. MAC SOFTWARE TEST
This will confirm that the hardware, software, and your
computer are all communicating properly. To perform a
software test please do the following:
1. Launch Discribe.
2. Click one of the options from the quick-launch menu
(i.e. Data CD).
3. Select Test Robotics from the Utilities Menu.
4. Click the Test Robot button.
5. You can select where you want discs to go during the test
and the number of times to repeat the test. Click Start. The
Publisher will perform your test.
D. CLEANING THE INK CARTRIDGE
It may be necessary to clean the ink cartridge nozzles if you
notice reduced print quality, or if you suspect an cartridge noz-
zle has become slightly dried out or clogged. If you are having
print quality problems, follow the steps below:
1. Remove the print cartridge.
2. Moisten a lint-free cloth with water.
3. Hold the cloth against the
nozzles for three seconds.
This will “wick” some
additional ink onto the
damp cloth.
4. Wipe in one direction only.
5. Repeat the process.
E. CLEARING A MEDIA JAM
If a disc should become jammed inside the printing area of the
Publisher, with the lid closed press the Cartridge Button. This
will eject the Printer Tray. Then open the lid. The Cartridge
Carrier will move to the center position automatically. WAIT
FOR THE CARTRIDGE CARRIER TO STOP MOVING! Then
carefully move the cartridge carrier assembly to the left to gain
access to the printer tray.
50 Maintenance and Troubleshooting