Filter
Top Products
The Power Input Port connects to the included power cable.
The internal power supply is a switching 100V~240V power
supply.
The Power Switch shuts off all power to the Publisher.
D. PC SYSTEM REQUIREMENTS
Before getting started, it is important for you to verify that
your PC meets the minimum system requirements. Here's what
you need in order to successfully copy discs at 8x or above
with the PrimoDVD 2.1 software:
• 700 MHz or faster Pentium III/IV processor running
Windows 2000, XP or Vista.
• 512 MB or greater RAM
• Free hard drive space of at least 10 GB.
• Available USB 2.0 Port. (This looks the same as a USB 1.0
port. Make sure you have a USB 2.0 port for optimal
performance)
If your PC does not have these minimum system requirements,
system performance may not be acceptable.
E. MAC SYSTEM REQUIREMENTS
Before getting started, it is important for you to verify that
your computer meets the recommended system requirements.
Here's what you need in order to successfully burn and print
with the Discribe software:
• G4 PowerPC 700MHz or higher running OS X version 10.2
or higher
• 256MB RAM
• Free hard drive space of at least 2 GB (up to 6 GB for DVD)
• Available USB 2.0 Port
• Do not connect the Publisher to any USB hubs or the USB
port on your keyboard. It should be connected directly to
an onboard USB 2.0 port.
If your computer does not have at least these minimum system
requirements, system performance may not be acceptable.
Getting Started 5