Reprinting Pages After Fault Condition
107
b. The printer then redisplays the original fault message, or
any other uncleared fault message.
c. Attempt to clear the fault condition again, or contact your
service representative.
• If the fault is cleared, and if you do
not
need to reload the paper
into the tractors (for example, the printer ran out of toner):
a. The printer goes OFFLINE.
b. Press ONLINE to resume printing.
• If the fault is cleared, and if you need to reload paper into the
tractors (such as after a paper jam), the following message
appears:
a. Reload the paper onto the tractors.
b. Press CLEAR.
c. Press ONLINE to resume printing.
Note that pages have
been lost.
• If the fault is cleared, and if you already have reloaded the
paper while clearing the fault condition (in Step 2), the following
message appears:
Press ONLINE to resume printing.
Note that pages have been lost.
Reload Paper
in Tractors
Not Reprinting
Failed Pages