Filter
Top Products
Chapter 2 Loading Paper
28
2. Turn on the printer by setting the power switch to | (on). When
you power on the printer, the following occurs:
a. The printer reads the emulation boot file and briefly
displays the message:
TESTING HARDWARE
PLEASE WAIT...
b. DIAGNOSTICS PASSED
c. STAND BY Light Flashes
d. The ONLINE indicator lights continuously and STAND BY
goes out.
NOTE: The printer can be set to power on in the OFFLINE state
instead of the ONLINE state. To print, ONLINE must be lit;
if it is not, press ONLINE.
If other messages and prompts appear on the control panel,
answer the prompts and follow the directions as explained on page
105.