Filter
Top Products
Chapter 5 System Status And Error Messages
108
IMPORTANT
If Reprint on Fault is
disabled
and an error occurs, and if the
“RELOAD PAPER IN TRACTORS” or ”NOT REPRINTING
FAILED PAGES” message appears, then any pages removed
from the printer are not reprinted, and the data for them is lost.
Clearing A Fault When Reprint On Fault Is
Enabled
1. A fault occurs.
2. Do what is necessary to correct the fault condition.
3. Press CLEAR.
4. The STANDBY LED blinks and the following message appears
while the printer attempts to clear fault:
• If the fault is not cleared:
a. The printer beeps and briefly displays the following
message:
b. The printer then redisplays the original fault message, or
any other uncleared fault message.
c. Attempt to clear the fault condition again, or contact your
service representative.
• If the fault is cleared, and if you do
not
need to reload the paper
into the tractors (for example, the printer ran out of toner):
a. The printer goes OFFLINE.
b. Press ONLINE to resume printing.
Standby ...
Clearing Fault
Faults Not Cleared