Filter
Top Products
23
2 Initial Setup
Installation Overview
The installation and setup of your printer should be performed by a
service provider trained and authorized by Printronix. Your service
provider is also responsible for doing a preinstallation site survey,
unpacking the printer, connecting the power and host data cables,
and installing the first set of consumable items in the printer.
Depending on the terms of your service contract, your service
provider might also power on your printer and configure it.
As the owner of the printer, it is your responsibility to prepare the
printer site. This includes providing adequate ventilation and power
for the printer.
Loading Paper
When loading paper, be sure the leading edge of the paper has a
clean, separating perforation without ragged edges.
NOTE: You do not need to power off the printer to replace paper. If
you leave the printer on and replace the paper, it will
resume printing where it left off when you put it online.
To load paper, perform the following steps. Repeat this procedure
whenever top-of-form must be reset (e.g., after clearing a paper
jam, loading new paper, etc.).