Filter
Top Products
Tsunami MP.11 Installation and Management
INSTALLING DOCUMENTATION AND SOFTWARE
The MP.11 also comes with documentation and software on a CD-ROM.
To install the documentation and software on a computer or network:
1. Place the CD-ROM in a CD-ROM drive. The installer normally starts automatically. You can also
start the installer manually by running the setup.exe program in the root directory of the
CD-ROM.
2. Click the Install Help and Software button and perform the necessary steps.
The CD-ROM contains the following documentation and software:
Online help
This is the help for the Web Interface. It is stored on your computer or network so it is always
available. The help is launched by clicking the question mark button in the Web Interface.
Documentation
Documentation also is available in an electronic (PDF) form.
ScanTool
The ScanTool program is a utility with which you can obtain or set the IP address of the MP.11
for access. See “ScanTool” on page 17 for details.
TFTP server
The TFTP (Triusingl File Transfer Protocol) server lets you transfer files across the network. You
can download configuration and license files, as well as image files for embedded software
upgrades, and you can upload files from the MP.11 for backup. Here downloading means
transferring files to the MP.11 and uploading means transferring files in the opposite direction.
Chapter 2. Installation 13
CPN 63708 Issue Date: 02/05/2003