Filter
Top Products
Tsunami MP.11 Installation and Management
COMMAND LINE INTERFACE OVERVIEW
The Command Line Interface (CLI) is a text-based interface with which you can configure and
manage the MP.11 by entering commands. This section describes only how to access the CLI; the
interface itself is described in “Chapter 6. Command Line Interface” on page 60.
The CLI can be used as an alternative to the Web Interface. You can, for example, quickly change
the settings of the MP.11 by running commands in a batch.
The CLI is accessible through the:
▪ Ethernet port connected through the network or with a cross-over Ethernet cable between the
computer and the MP.11
▪ Serial port of the MP.11
Ethernet Port
To use the CLI through the Ethernet port, you must have a telnet program and the IP address of the
MP.11. On most computers, the telnet program is called telnet. See “MP.11 IP Address” on page 17
for details.
To access the MP.11 through Ethernet:
1. From the Windows Start menu, select Run; enter telnet followed by the IP address, as shown in
the following sample Run command window.
2. Click OK to start the telnet program.
3. You are prompted for your password:
Please enter password:
4. Enter the password (the default password is public).
You can now use the CLI.
Chapter 3. Management Overview 21
CPN 63708 Issue Date: 02/05/2003