Tsunami MP.11 Installation and Management
The recommended setting is auto-speed-auto-duplex. You can also limit the traffic of the Ethernet
interface by setting the input and output bandwidth parameters.
Related CLI Commands:
show ethernet
show ethermacaddr
set ethernet 1 etherspeed <autospeedauto/autospeedhalf/
100auto/100full/100half/10full/10half>
set ethernet 1 ethrxbwlimit <multiple of 64Kbps e.g. 32 = 2Mbps>
set ethernet 1 ethtxbwlimit <multiple of 64Kbps e.g. 32 = 2Mbps>
MONITORING SETTINGS
The MP.11 offers various facilities to monitor its operation and interfaces. Only the most significant
monitoring categories are mentioned here.
Wireless
To monitor the wireless interfaces, click Monitor Î Wireless. This tab lets you monitor the general
performance of the radio and the performance of the WORP Base or WORP Satellite interfaces.
Chapter 4. Basic Management 32
CPN 63708 Issue Date: 02/05/2003