Filter
Top Products
Tsunami MP.11 Installation and Management
SECURITY SETTINGS
To prevent misuse, the MP.11 provides wireless data encryption and password-protected access. It is
important to set the encryption parameters and change the default passwords.
Encryption
You can protect the wireless data link by using encryption. Both ends of the wireless data link must
use the same parameter values.
To set the encryption parameters, click: Configure Æ Security Æ Encryption.
You can set the following encryption parameters:
Encryption Status
This parameter enables or disables WEP encryption.
Key Length
The encryption key length determines the level of security and must always be set. The values
that can be set depend upon the radio type. MP.11 always has a “GOLD” card allowing 128-bit
encryption. For backward compatibility, the 40 bits encryption is available (but is never used
with WORP).
Encryption Key 1 – 4
These WEP encryption keys require an alphanumeric value. The length of the value depends upon
the Key Length parameter.
Encrypt Data Transmissions Using
This parameter determines which encryption key is used.
Chapter 4. Basic Management 34
CPN 63708 Issue Date: 02/05/2003