Filter
Top Products
Tsunami MP.11 Installation and Management
Modifying Several Table Entries
You can also modify several table entries at once by indicating the index of the table row and the
parameters that must be modified. With the search command, you can see which parameters are in
the table.
Example:
set snmpipaccesstbl 1 ipaddr 10.0.0.12 submask 255.255.255.248 cmt “First Row”
Enabling, Disabling, or Deleting a Table Row
You can also enable, disable, or delete a row in a table. The syntax of this command is:
<table name> <row> <enable/disable/delete>, or
<table name> <row> status <1/2/3>
Example 1: The following command enables the row at index 2 of the SNMP IP access table
(snmpipaccesstbl).
set snmpipaccesstbl 2 enable
Example 2: The following command disables the row at index 2 of the SNMP IP access table
(snmpipaccesstbl). The status codes have the following meaning: 1 is enable, 2 is disable, 3 is
delete.
set snmpipaccesstbl 2 status 2
Chapter 6. Command Line Interface 63
CPN 63708 Issue Date: 02/05/2003