Filter
Top Products
Using the Desktop Projector™ 4100/4200
3-21
MENUS SETTING
Source Select Selects the desired video and audio source.
Source Mode Changes to an input source that matches or is close to the
current source.
Sync Status Displays the Horizontal and Vertical frequency and polarity
of the currently selected video source.
Changing the Input Video Source
To change the input video source, use the right arrow key to move to the
Source Select box and use the ▲ and ▼ keys to select Computer #1,
Computer #2, Video #1, or Video #2.
NOTE: There will be a 2.5 second delay before the source changes.
Changing the Source Mode
The Source Mode box lists all of the input source settings that match or are
close to the type of source the projector sensed.
1 To change the Source Mode setting, use the arrow keys to move to the
Source Mode box and use the ▲ and ▼ keys, mouse, or Cyclops pointer
to select a different input source.
2 Use the arrow keys to Cancel ( ) or Select ( ) the new source entry.
The input measurements of the current settings are displayed on the Sync
menu.
IMAGE MENU
This menu is used to adjust the projected video image and select how the
projector will display.
Menus
Image
Input Source
Projection
Advanced
Image
Tools
Adjust
Audio
Preferences
Figure 3-16 Image menu