Filter
Top Products
5–Windows Server 2003 and 2008 Driver Installation and Configuration
Windows Server Driver Configuration
5-10 NE0154601-00 A
Large Receive Offload (LRO) This parameter specifies the large receive offload —
enable/disable options.
Registry Key: LRO
Default: Enabled
Values: Enabled/Disabled
Large Send Offload V1 IPv4 This parameter specifies the large send offload —
enable/disable options.
Registry Key: LsoV1IPv4
Default: Enabled
Values: Enabled/Disabled
Size of LSO: 64K maximum
Large Send Offload V2 IPv4
a
This parameter specifies the large send offload —
enable/disable options.
Registry Key: LsoV2IPv4
Default: Enabled
Values: Enabled/Disabled
Size of LSO: 64K maximum
Large Send Offload V2 IPv6
a
This parameter specifies the large send offload —
enable/disable options.
Registry Key: LsoV2IPv6
Default: Enabled
Values: Enabled/Disabled
Size of LSO: 64K maximum
Locally Administered Address This is the locally administered address (LAA) that
users/administrators can set on this interface to over-
ride the permanent address of the QLogic adapter
(that may have been flashed into the hardware).
Registry Key: NetworkAddress
Format: Hex
Options: Value. (A value is required — enter the
12 hex bytes of the MAC address to be used, or
not present.)
Table 5-1. Advanced Properties Parameters (Continued)
Parameter Description