Q-Logic 3100 Network Card User Manual


 
5–Windows Server 2003 and 2008 Driver Installation and Configuration
Windows Server Driver Configuration
NE0154601-00 A 5-13
Receive Side Scaling Rings This parameter controls the number of rings used.
The total is calculated by 1KB ×2
n
with a value of 5 for
a maximum of 32KB.
Registry Key: MaxStatusRings
Default: 2
Max: 4
Min: 1
Step: 1
TCP Checksum Offload IPv4 This parameter enables/disables the TCP checksum
offload for IPv4. There are four TCP checksum
options: 0 (off), 1 (transmit), 2 (receive), and 3 (trans-
mit/receive).
Registry Key: TCPChecksumOffloadv4
Default: 3 (Transmit and receive checksum
enabled)
Values: 0, 1, 2, 3
TCP Checksum Offload IPv6
a
This parameter enables/disables the TCP checksum
offload for IPv6. There are four TCP checksum
options: off (0), transmit (1), receive (2), and trans-
mit/receive (3).
Registry Key: TCPChecksumOffloadv6
Default: 3 (Transmit and receive checksum
enabled)
Values: 0, 1, 2, 3
UDP Checksum Offload IPv4 This parameter enables/disables the UDP checksum
offload. There are four UDP checksum options: 0 (off),
1 (transmit), 2 (receive), and 3 (transmit/receive).
Registry Key: UDPChecksumOffloadv4
Default: 3 (Transmit and receive checksum
enabled)
Values: 0, 1, 2, 3
Table 5-1. Advanced Properties Parameters (Continued)
Parameter Description