Filter
Top Products
2 – General Description
Switch Management
2-12 59265-02 A
S
Simple Network Management Protocol
SNMP provides monitoring and trap functions for the fabric. SANbox firmware
supports SNMP versions 1, 2, and 3, the Fibre Alliance Management Information
Base (FA-MIB) version 4.0, and the Fabric Element Management Information
Base (FE-MIB) RFC 2837. Traps can be formatted using SNMP version 1 or 2.
Refer to the SANbox Simple Network Management Protocol Reference Guide for
more information.
You must use the CLI to configure SNMP version 3. Refer to the Snmpv3user
command in the SANbox 5800V Series Fibre Channel Switch Command Line
Interface Guide.
Storage Management Initiative–Specification (SMI-S)
SMI-S provides for the management of the switch through third-party applications
that use the SMI-S. Refer to the CIM Agent Reference Guide for more information.
File Transfer Protocols
FTP and TFTP provide the command line interface for exchanging files between
the switch and the management workstation. These files include firmware image
files, configuration files, and log files.