Filter
Top Products
SANbox 9000
™
Series Chassis Replacement Guide
2 59244-00 A
A
Backup the Switch
Configuration
Create a backup of the switch configuration if
one does not already exist and upload it from
the switch to the management workstation.
Open a Telnet session and enter the
Config Backup command to create the file on
the switch. Then use FTP to upload it to the
management workstation. You can accomplish
the same task using the Archive function of
the QuickTools interface.
Switch login: admin Telnet
Password: password
Sanbox #> admin start
Sanbox (admin) #> config backup
SANbox (admin) #> exit
=======================================
ftp <ip_address> FTP
User: images
Password: images
ftp> binary
ftp> get configdata
ftp> bye
Inventory Feature Licenses
Enter the Feature Log command to display the
installed feature licenses. Make note of the
license keys so that the feature licenses can
be installed in the new chassis.
If you have installed license keys, enter the
Show Version command and make note of the
chassis serial number. You will need this
number to request new license keys later.
SANbox #> feature log
Mfg Feature Log:
----------------
Customer Feature Log:
---------------------
1) day mon date hh:mm:ss year - Switch Licensed for
HyperStack(tm)capability
200000-LCRXIET7KXSXO
SANbox # > show version
*****************************************************
* *
* Command Line Interface SHell (CLISH) *
* *
*****************************************************
SystemDescription SANbox 9000 FC Switch
EthNetworkAddress 10.20.11.192 (use 'set setup system
EthMACAddress 00:c0:dd:00:71:ee
WorldWideName 10:00:00:c0:dd:00:71:ed
ChassisSerialNumber FAM033100024
SymbolicName SANbox
ActiveSWVersion V6.2.x.x.xx.xx
ActiveTimestamp day month date time year
DiagnosticsStatus Passed
Power Down the Switch
Isolate the switch from the fabric.
Confirm that the primary CPU Heartbeat LED
is showing the normal 1 blink per second. This
allows the switch to correctly report power
supply status.
Move the On/Off switch to the Off position on
both Power Supply blades.
Unfasten the restraint bails from the plugs,
and unplug the power cords from both Power
Supply blades.
1. Heartbeat LED
1