SANbox 9000
™
Series Chassis Replacement Guide
4 59244-00 A
A
Remove Power Supply
Blades
WARNING!!
The Power Supply blade faceplate and
internal surfaces can become very hot.
Handle with care.
Rotate the latch to the full open position. Pull
the Power Supply blade by the latch to
disengage the blade from the midplane
connector. Carefully slide the Power Supply
blade out of the chassis.
1. Latch, PS0 blade
Remove the Fan Blades
Rotate the latch to the full open position. Pull
the Fan blade by the latch to disengage the
blade from the midplane connector. Carefully
slide the Fan blade from the chassis.
1. Latch, FAN0 blade
Remove CPU Blades
Label the CPU blades, CPU0 and CPU1.
Rotate the latch to the full open position. Pull
the CPU blade by the latch to disengage the
blade from the midplane as shown.
1. Latch, CPU0 blade 2. CPU1 blade
1
1
1
2