Q-Logic 59244-00 A Network Router User Manual


 
SANbox 9000
Series Chassis Replacement Guide
59244-00 A 5
A
Remove Chassis from the
Rack
Using a crosshead screw driver, remove the
screws that secure the chassis to the rack.
Slide the chassis out of the rack.
Slide the chassis out of the cabinet until the
rail latches drop down to stop the chassis. Lift
up on the latches on both sides and finish
removing the empty chassis.
If you have installed license keys, make note
of the chassis serial number. You will need this
number to obtain new license keys later.
1. Latch
Remove Brackets and Rails
Make a note of the location and orientation of
the brackets and the rails. Remove the
brackets and rails from the chassis and set
them aside along with the screws. You will
install them on the new chassis.
1. Bracket 2. Rail
Prepare the New Chassis
Remove the shipping covers from the ends of
the new chassis. Each cover is secured with
six screws, three on each side.
Install the brackets and the rails on the new
chassis as they were installed on the old
chassis.
1. Covers
1
1
2
1
1