Filter
Top Products
16 Receive Pattern Character Register
The Receive Pattern Character Register is used to set the character value to be used in
receive pattern detection. The address of this register is Base+B (hex). This register can be
ignored if the external FIFOs are not being used.
character value (0-255)
Bit 0Bit 1Bit 2Bit 3Bit 4Bit 5Bit 6Bit 7
Table 14 --- Receive Pattern Character Register - Read/Write
Bits 7-0: Receive Pattern Character: This is
the numeric value of the character to be detected. See page 37 for details on the
receive character pattern detection feature.