Radio Shack PRO-107 Scanner User Manual


  Open as PDF
of 33
 
36
Searching
37
Searching
–Services– Menu
Aircraft Search civilian and military air frequencies:
108-118MHz Navigation
118-137MHz CivilianVoice
138-150MHz MilitaryVoice(excludes2mAmateur)
225-400MHz MilitaryVoice
Railroad SearchtheAssociationofAmericanRailroads(AAR)VHF
railroad frequencies used in the US and Canada.
Amateur Search amateur radio frequencies:
28.0-29.7MHz 10mBand
50-54MHz 6mBand
144-148MHz 2mBand
222-225 MHz 1.25cm Band
420-450MHz 70cmBand
902-928MHz 33cmBand
1240-1300MHz 23cmBand
CB Search the Citizens Band radio frequencies.
Marine SearchtheVHF-FMmarineradioband.
FRS/GMRS/
MURS
SearchtheFRS,GMRS,MURS,DOTandSTARradio
frequencies.
To change the Service Search parameters:
Press MENU while any Service Search is active. The following options
are available:
–”Service X”– Menu
Main Menu Navigates to iSCAN’s Main Menu.
Srvc Srch Menu Navigates to the Services Menu.
Store Channel Stores a found frequency as an object in the first playlist.
Cancel Changes Exits the Service Search Menu without saving changes.
Save Changes Saves your changes and exits the Service Search Menu.
Attenuator Limits the effective range of Service Search and may
help reduce interference from strong local transmitters.
Press /II/SEL or to enable or disable Attenuator.
–”Service X”– Menu
Zeromatic Helps iSCAN tune to exact frequencies when searching.
Press /II/SEL or to enable or disable Zeromatic.
Zeromatic does not have any effect in channel-based
searchessuchasCB,MarineandFRS/GMRS/MURS
bands.
Delay When delay is enabled, iSCAN waits for two seconds
after a transmission before resuming search. Press /II/
SEL or to enable or disable delay.
RX Mode SetstheRXmodulationmodetoautomatic,orforces
AMmodeorFMmode.RXModefunctionsinAircraft
and Amateur bands. Press or to change.
Frequency
Ranges
For Service Searches that utilize frequency ranges, this
option allows you to control which ranges are searched.
The Frequency Ranges option is available in the Public
Safety, Aircraft and Amateur Radio Service Searches.
Press /II/SEL or to enable or disable frequency ranges.
Limit Search
iSCAN’s Limit Search feature allows you to configure a customized
search between the lower and upper frequencies that you choose.
To use Limit Search:
1. Press MENU to access the Main Menu, scroll to
Search, and
press to enter to the Searches Menu.
2. Scroll to
Limit Search and press to start the Limit Search.
n Note: Press SKIP to block reception of undesired signals.
To store found objects in playlists:
1. Press MENU when you find a frequency you want to store.
2. Select
Store Channel.
3. Press SEL. The new object is added to the first playlist and has
the alpha tag “Stored Search.”
n Note: Tomovethenewobjecttoanotherplaylistoredit
thealphatag,usetheObjectEditMenu(seepage 29)orthePC
Application(seepage 46).
 previous next