Filter
Top Products
3 SpeedTouch™ Web Interface
E-DOC-CTC-20031204-0011 v2.0
28
System Log Click this link to view the System Log page.
This page allows you to view the activity on the SpeedTouch™ since power on:
IP Addresses Click this link to display the IP Addresses page.
This page allows you to view the SpeedTouch™ local IP address configuration:
If needed you are able to assign one or more additional IP addresses to the Speed-
Touch™ Ethernet interface (identified as eth0), e.g. for purposes of multi-homing.
You can also delete superfluous IP addresses. However be aware that you cannot delete
the SpeedTouch™ IP address which you are currently using.
DHCP Click this link to display the Dynamic Host Configuration Protocol (DHCP) page.
• Click the DHCP Server tab to access the DHCP server pages.
• The Server Config tab allows you to enable/disable the SpeedTouch™
(Auto)DHCP server:
By default (as shown above) the SpeedTouch™ DHCP server will be
disabled.