Filter
Top Products
4 Support
E-DOC-CTC-20031204-0011 v2.0
45
4.2.1 Upgrade via the SpeedTouch™ Upgrade
Wizard
Introduction The procedure described in this section are valid only in case:
• You run an MS Windows Operating System or Mac OS X.
• Your SpeedTouch™ and computer are properly connected:
• Through Ethernet or USB in case you run an MS Windows OS
• Through Ethernet in case you run Mac OS X
• The new system software file is of the type bant-f_XX42xx.bin,
e.g. bant-f_AA4279.bin.
During the upgrade procedure all configuration settings are backed up by the wizard
and restored after uploading the system software.
Starting the
SpeedTouch™ Upgrade
wizard
Depending on your Operating System, you must start the SpeedTouch™ Upgrade
wizard as follows:
On MS Windows
Operating Systems
Proceed as follows:
1 Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
Note If the SpeedTouch™ CD Browser window does not appear automati-
cally, open a Run window via Start > Run from the Start menu and
enter following path: D:\Menu.exe, where D is the drive letter of your
CD-ROM drive.
2 The Choose Language window prompts you to select a language.
Select the language of your choice and click OK.
Note The selected language will also be used as default language in the
SpeedTouch™ web pages. See “ Language” on page 31 for more infor-
mation on how to change the web page language.
Topic Page
On MS Windows Operating Systems 45
On Mac OS X 46