Filter
Top Products
4 Support
E-DOC-CTC-20031204-0011 v2.0
39
Configuration of the
SpeedTouch™ (and PC)
Proceed as follows:
1 As soon as the SpeedTouch™ Setup wizard has detected your SpeedTouch™
device, you can proceed with the configuration procedure.
Note If the SpeedTouch™ has been configured before:
• It may be protected by a system password. You must provide
user name and system password before you can view the device
details or continue with the configuration.
• You will be asked to choose between reconfiguring your Speed-
Touch™ or changing your Local Area Network configuration.
Select Reconfigure the SpeedTouch™ and click Next.
2 The following window invites you to select the appropriate service for your Inter-
net connectivity:
Select region, Provider and Service as specified by your Service Provider and click
Next to continue.
Note If the Service Provider has included a separate disk with a dedicated
service profile, click Have Disk to navigate to the location of the appro-
priate Service template file.
3 Subsequent screens will guide you through the configuration setup of both the
SpeedTouch™ and your PC. Follow the instructions and enter the required infor-
mation whenever needed. The requested information will depend on the selected
Service profile and should be provided by your Service Provider.
Click Next whenever requested.
4 The SpeedTouch™ Setup wizard will update the SpeedTouch™ configuration and
your PC’s configuration according the Service profile. You can follow the configu-
ration progress in following window: