Renesas M306N4T3-RPD-E Switch User Manual


 
( 3 / 76 )
Preface
The M306N4T3-RPD-E is an emulation pod for the M16C/6N Group M16C/6N4, 6N5 of 16-bit
MCUs. It is used with a PC4701 emulator.
This user's manual mainly describes specifications of the M306N4T3-RPD-E emulation pod and how
to setup it. For details on the following products, which are used with the M306N4T3-RPD-E, refer
to each product's user's manual.
• Emulator: PC4701 User's Manual
• Emulator debugger: M3T-PD30 User's Manual
All the components of this product are shown in "2.1 Package Components" (page 22) of this user's
manual. If there is any question or doubt about this product, contact your local distributor.
To use the product properly
Precautions for Safety
In both this user's manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.
When using outside Japan
When using in Europe, the United States, or Canada, be sure to use both the emulator
and the emulation pod which meet local standards. EMI standards are not met when
the M306N4T3-RPD-E is used with the PC4700H emulator.