Filter
Top Products
( 19 / 72 )
2.2 Package Components
The M30830T-EPB package consists of the following items. When unpacking, check to see if your
M30830T-EPB contains all of these items.
Table 2.1 Package components
* Please keep the M30830T-EPB's packing box and cushion material in your place for reuse at a
later time when sending your product for repair or other purposes. Always use these packing box
and cushion material when transporting this product.
* If any of these items are missing or found faulty, please contact your distributor.
* If there is any question or doubt about the packaged product, contact your distributor.
* For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics
Co., Ltd.
http://www.yamaichi.co.jp/e/index.shtml
2.3 Other Tool Products Required for Development
To bring forward programs development on the M32C/81, 82 and 83 Group MCUs, the products
listed below are necessary in addition to those contained package above. Get them separately.
Table 2.2 Other tool products required for development
* To purchase these products, contact your nearest distributer.
Item
M30830T-EPB emulation probe
M30800T-PTC converter board for 100-pin LCC
IC61-1004-051 100-pin LCC socket made by Yamaichi Electronics Co., Ltd.
Hardware tool user registration FAX sheet (English)
Hardware tool user registration FAX sheet (Japanese)
M30830T-EPB user's manual (this manual)
M30830T-EPB user's manual (Japanese)
Quantity
1
1
1
1
1
1
1
Product
Emulator main unit
Emulator debugger
Product name
PC7501
M3T-PD308F
Converter boards
Notes
Required
Required
100-pin 0.65-mm-pitch QFP
(100P6S-A)
144-pin 0.5-mm-pitch LQFP
(144P6Q-A)
100-pin 0.5-mm-pitch LQFP
(100P6Q-A)
Required according to the foot
pattern of the target system
(see "3.6 Connecting the Target
System" on page 34)
M3T-100LCC-QSD
M3T-100LCC-DMS
+
M3T-FLX-100NSD
M3T-F160-100NSD
M3T-100LCC-DMS
+
M3T-DUMMY100S
M3T-100LCC-DMS
+
M3T-DIRECT100S
M3T-100LCC-DMS
+
M3T-FLX-100NRB
M3T-FLX-144NSD