Filter
Top Products
( 31 / 72 )
Table 3.3 Switch settings of the M30830T-EPBM (2/2)
Signal Switch Setting Description
P87/X
CIN/
V
CONT
SW4
SW5P86/X
COUT
Connects the P87/XCIN/VCONT pin of the MCU to the
LPF in the emulation probe (uses the P87/X
CIN/
V
CONT pin as LPF for PLL).
Does not connect the P86/XCOUT pin.
Connects the P86/XCOUT pin of the MCU to the
GND in the emulation probe (uses the P86/X
COUT
pin as LPF for PLL).
Connects the P87/X
CIN/VCONT pin of the MCU to the
sub-clock oscillator circuit (32.768 kHz).
Connects the P87/X
CIN/VCONT pin of the MCU to the
target system (uses the P87/X
CIN/VCONT pin as
P87).
Connects the P86/XCOUT pin of the MCU to the
target system (uses the P86/X
COUT pin as P86).
(Factory-setting)
LPF
XCIN P87
LPF
XCIN P87
LPF
P87
(Factory-setting)
LPF
NC P86
XCIN
LPF
NC P86
LPF
P86NC