Filter
Top Products
Setting Up the Software
3.2.1 E10A-USB Software Installation Procedure
Rev. 1.01 May 7, 2008
3-7
REJ11J0015-0101
3
(5) Next, install an Autoupdate Utility. Click “Next”.
Figure 3.2.5 E10A-USB Software Installation Procedure (5)
Note: When you have not selected “Autoupdate” on the Choice of an installation product, the above dialog is not
displayed.
(6) When the installation is complete, the dialog shown in
Figure 3.2.6 is displayed. Click “Finish”.
Figure 3.2.6 E10A-USB Software Installation Procedure (6)