Filter
Top Products
. Be careful not to touch the OPC (Organic Photo Conductor, blue material) inside
the copier.
l
Do not expose the OPC to light.
0
Remove all tapes.
Remove shipping thumbscrew
0,
then
open
the platen cover. (No thumbscrew
0
*
m
for type
i
model)
Next, remove shipping thumbscrew
0,
and
attach the sticker to conceal the hole of
shipping thumbscrew
0.
The removed shipping thumbscrews should
be kept as shown in step
a
for future
shipping.
m:
Do not turn on the main switch until
the two shipping thumbscrews have been
removed, otherwise the copier may be damaged.
Store the two shipping thumbscrews as
-
shown. (Only short thumbscrew with type
1 model)
m:
Make sure to keep the shipping thumb-
screws; they must be attached prior to shipping.
aa
Remove the paper in the unit.
Close the ton unit bv pressing down firmly
a
on the marked
position.
Attention: Make sure to press the marked position.
15