Ricoh 1008 All in One Printer User Manual


 
Remove the toner cassette from the
vinyl bag.
l Keep the vinyl bag for repacking.
Rock the toner cassette back and
forth five or six times.
Set the toner cassette on a flat
surface and remove the two tapes
inside the unit completely as
shown.
l Hold the toner cassette firmly with one
hand to prevent it from turning over.
l Yellow marks appear at the end of the
tapes. Make sure to remove the tapes
completely from the toner cassette.
m:
If these tapes are not removed,
the toner cassette may be damaged, and
unable to make a copy.
Open the top unit.
Confirm that the A mark
0
of the
toner cassette is pointing upward.
Align guides on both sides of the toner
cassette with the left (with
l mark)
and right (with
c
mark) guides
@
of
the toner cassette holder, then insert
the toner cassette into the copier as
shown until it clicks into place.
l Do not insert the toner cassette into the
copier until the tapes are completely
removed.
Close the top unit by pressing
down firmly on the marked posi-
tion.
Attention: Make sure to press the marked
position.
16