Filter
Top Products
To make copies the same size as your originals.
Lift the platen cover and place the
0
original face down on the exposure
glass. Align the center of your
original with the arrow mark on the
scale. Lower the platen cover.
If your copier includes an enlarge-
ment/ reduction feature (Type 2
panel only), make sure the magni-
fication ratio is set to Full Size. If
not, press the
Reduce/Enlarge
key until Full Size indicator is lit.
Enter your desired number of copies
using the + key (to increase copy num-
ber) or
-
key (to reduce copy number).
l
Up to 50 copies can be entered.
l
To reset the number to 1, press the
Clear/
Stop
key.
l
When copy counter is 1, pressing the
-
key changes the counter to 50. Likewise,
0
++
+o
when the-counter is
50,
pressing the + key
1,z
3
48,49,50
changes the counter to 1.
,
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
eb
Press the
Start
key.
l
To stop the machine during a multi-copy
run, press the
Clear/Stop
key.
l
To resume copying, press the
Start
key.
l
To clear the copy counter, press the
Clear/Stop
key.
Auto Start
-
Setting Copy Orders During Warm-Up
If you press the
Start
key during warm-up, the
Start
indicator will
blink
in red and
green.
The
copier will start copying when warm-up is
completed.
l
To cancel Auto Start, press the
Clear/Stop
key.