Ricoh 1075 All in One Printer User Manual


 
User Tools (System Settings)
88
5
Bidirectional SCSI print
Specifies the printer's response mode and so forth for a status request when
using the IEEE 1394 interface.
Note
Default setting: ON
If this is set to OFF, bidirectional communication functions will not
work.
Interface Settings/IEEE 802.11b (option)
Preparation
You must install the Wireless LAN board (option) into the machine.
Note
Be sure to make all settings simultaneously.
Communication Mode
Specifies the communication mode of the Wireless LAN.
Note
Default setting: 802.11 Ad hoc
SSID Setting
Specifies SSID to distinguish the access point in the Infrastructure mode.
Note
Default setting: blank (ASSID)
If blank is specified in 802.11b Ad hoc mode or Ad hoc mode, ASSID ap-
pears.
Channel
Specifies a channel when you select 802.11b Ad hoc mode or Ad hoc mode.
Note
Default setting: 11
The channel can be set from 1 - 13.
Wireless LAN Signal
Shows the radio-wave conditions of the access point connected in Infrastruc-
ture mode.
Note
Radio wave status is shown when you press the [Wireless LAN Signal] key.
MartiniC1_GBzen2_FM.book Page 88 Friday, April 19, 2002 2:18 PM