Ricoh 1075 All in One Printer User Manual


 
Basics
38
2
Acquiring the IP Address from the DHCP Server
To use the DHCP server to acquire the IP address, select [DHCP] from [Network
Boot
].
Note
You need to make settings when you use DHCP. See Using DHCP in the
Network Printing Guide.
To always assign the same IP address to the machine, reserve the IP ad-
dress for the machine on the DHCP server. See Using DHCP in the Net-
work Printing Guide.
Use the default IP address.
A Make sure that the [Network] key is selected, and then press the [Network
Boot] key.
B Press the [DHCP] key, and then press the [OK] key.
When using NetWare
To use the machine on NetWare, be sure to select the type of [NW Frame Type].
You can select the following frame types:
Auto Select (Default)
Ethernet II
Ethernet 802.2
Ethernet 802.3
Ethernet SNAP
Note
Make sure to select the frame type same as the file server.
When you select Auto Select, the frame type detected upon startup is au-
tomatically set. Therefore, your desired frame type may not be selected by
the system, which supports multiple frame types. Select the desired frame
type.
To use the machine in a pure IP environment on NetWare 5/5.1, select [Ef-
fective] for TCP/IP in step
D
.
MartiniC1_GBzen2_FM.book Page 38 Friday, April 19, 2002 2:18 PM