Ricoh 1075 All in One Printer User Manual


 
Troubleshooting
114
6
Misfeeds occur frequently. The side guides of the pa-
per tray may not be locked.
Check the side guides are locked.
p.132 Changing the Paper Size
The end guide of the paper
tray may not be locked.
Check that the end guide is locked.
p.132 Changing the Paper Size
You may have loaded pa-
per whose size cannot be
detected automatically.
When you use paper of a size that
cannot be detected automatically,
set the paper size. p.79 Tray Pa-
per Size: (Tray 2,3), p.177 Copy
Paper
The saddle stitching staple
cartridge for the Booklet
Finisher has been removed.
Reset the saddle stitching staple car-
tridge. p.134 d Adding Staples
An error message remains,
even if misfed paper is re-
moved.
When a misfeed message
appears, it remains until
you open and close the cov-
er, as required.
Clear misfed paper and open and
close the front cover. p.122 x
Clearing Misfeeds
Cannot duplex print You cannot use the paper
in the bypass tray for du-
plex printing.
For duplex printing, select Tray 1-3
in Copier mode or with the printer
driver.
The setting for the Paper
Type: Tray 1-3 is 1 Side
Copy.
Select 2 Sided Copy for Paper
Type: Tray 1-3 p.80 Paper Type:
(Tray1-3, LCT)
During saddle stitching,
paper comes out open and
not neatly stacked.
Depending on the type of
paper, the paper opens as it
rebounds when it is folded.
Select a paper type with low re-
bound.
The user code entry dialog
box is displayed.
Users are restricted by user
management.
Enter the user code (up to 8-digits),
and then press the [#] key.
Machine Status Problem/Cause Action
MartiniC1_GBzen2_FM.book Page 114 Friday, April 19, 2002 2:18 PM